using System;
using System.Collections.Concurrent;
using System.Collections.Generic;
using System.Diagnostics;
using System.Globalization;
using System.IO;
using System.Linq;
using System.Text;
using System.Text.RegularExpressions;
using System.Threading;
using System.Threading.Tasks;
namespace YuncangTrace.LocalService.Services.Hik;
/// 一次「这个时段到底有没有录像」的探测结果
/// 拉到数据 = 有录像
/// RTSP 模式下解出的帧数(SDK 模式为 -1)
/// 换算出来的 RTSP 1 起通道序号(排查用)
/// 失败原因(无录像 / 端口不通 / 密码错)
/// 实际走通的通道:SDK(8000)/ RTSP(554)
public sealed record PlaybackCheck(bool HasRecord, int Frames, int LogicalChannel, string? Error, string Source = "");
/// 下载一路回放的进度
/// 0~1(拿不到总时长时为 null,界面显示为不确定进度)
/// 当前状态文案
public sealed record PlaybackProgress(double? Percent, string Message);
///
/// 海康 **按时间回放**:校验有没有录像 / 拉流预览 / 下载成 mp4
///
/// 两条通道,**优先 8000(SDK 私有协议),不行再走 554(RTSP)**:
///
/// | | SDK(`NET_DVR_GetFileByTime_V40`) | RTSP(`Streaming/tracks/...`) |
/// | --- | --- | --- |
/// | 端口 | 8000(现场基本都开) | 554(可能关/改端口) |
/// | 通道号 | **海康通道号**(34) | **RTSP 序号**(2) |
/// | 落地 | 设备原始封装 PS,需 ffmpeg 转封装 | 直接交给 ffmpeg |
/// | 速度 | 2~5x 实时,带百分比进度 | 约 0.5~3x,靠 ffmpeg 进度 |
///
/// 实测(本项目 NVR):RTSP 的 `tracks/201`(=通道34)能拉到回放,
/// `tracks/3401` 直接 400;空时段会返回 400 而不是空流 —— 两个信号都能用来判「有/无回放」。
///
public sealed class HikPlaybackService : IDisposable
{
/// Hikvision RTSP 默认端口(设备侧可改,用环境变量覆盖)
private static readonly int RtspPort = ResolveRtspPort();
private static readonly Regex FrameRegex = new(@"frame=\s*(\d+)", RegexOptions.Compiled);
private static readonly Regex OutTimeRegex = new(@"out_time_us=(\d+)", RegexOptions.Compiled);
private static readonly Regex SpeedRegex = new(@"speed=\s*([\d.]+)x", RegexOptions.Compiled);
/// RTSP socket 读超时(微秒)。回放拉完设备不再推流,靠它让 ffmpeg 收尾退出
private const string SocketTimeoutUs = "5000000";
private readonly HikDeviceService _device;
///
/// 「这台设备的 8000 下载能不能用」缓存(key = host|port|channel)
///
/// 实测:有些固件 NET_DVR_GetFileByTime* 直接不工作(返回句柄但 0 字节),
/// 每路都去试一遍要多等好几秒 → 试过一次就记住,下次直接走 RTSP。
///
private readonly ConcurrentDictionary _sdkPlayback = new(StringComparer.OrdinalIgnoreCase);
///
/// 「录像机时间 - 本机时间」偏差缓存(key = host|port|user)
///
/// 扫码时间是**本机时钟**打的,回放是按**录像机本地时间**定位的;两边不一致时
/// (现场实测本机慢了 9 秒),短回放窗口会把面单直接截掉。
/// 以录像机时钟为基准做平移,缓存 10 分钟(读不到设备时间时 1 分钟内不重试)。
///
private readonly ConcurrentDictionary _clockOffsets =
new(StringComparer.OrdinalIgnoreCase);
private const long ClockOffsetTtlMs = 10 * 60 * 1000;
private const long ClockOffsetFailTtlMs = 60 * 1000;
public HikPlaybackService(HikDeviceService device)
{
_device = device;
}
/// ffmpeg 是否可用(没有就既不能校验也不能下载)
public bool Available => HikFfmpegService.ResolveFfmpeg() is not null;
// ==================== 通道号换算 ====================
///
/// 海康通道号 → RTSP 的 1 起序号
///
/// 换算依赖设备的「首个数字通道号」(本项目是 33):
/// logical = channel - startDigital + 1。SDK 不可用时按 33 兜底。
///
public int LogicalChannel(string host, int port, string userName, string password, int channel)
{
var startDigital = 33;
try
{
var start = _device.GetStartDigitalChannel(host, port, userName, password);
if (start > 0) startDigital = start;
}
catch (Exception ex)
{
AppLog.Write($"[playback] 取起始数字通道号失败,按 {startDigital} 兜底:{ex.Message}");
}
var logical = channel - startDigital + 1;
return logical > 0 ? logical : channel;
}
///
/// 生成回放 RTSP 地址
///
/// ⚠️ **时间语义实测结论(重要)**:海康 RTSP 的 starttime 按**设备本地时间**解析,
/// 结尾那个 Z 只是格式后缀、**不代表 UTC**。
/// 实测同一时间点:
/// - 传 20261018T131550Z(UTC 写法)→ 画面 OSD 是 **13:15:49**(2号工作台,无任务)
/// - 传 20261018T211550Z(本地写法)→ 画面 OSD 是 **21:15:49**(1号工作台,波次B…)
/// 也就是按 UTC 传会整整差一个时区(本机 +08:00 差 8 小时)。
///
/// 默认按本地时间拼;万一遇到严格按 UTC 解析的固件,用环境变量 YUNCANG_RTSP_TIME=utc 切回去。
///
/// 0 主码流 / 1 子码流(回放路径里是 01 / 02)
public static string BuildRtspUrl(string host, string userName, string password, int logicalChannel,
DateTimeOffset start, DateTimeOffset end, int streamType = 0, int rtspPort = 0)
{
var port = rtspPort > 0 ? rtspPort : RtspPort;
var startText = FormatTime(start);
var endText = FormatTime(end);
var streamNo = streamType == 1 ? "02" : "01";
return $"rtsp://{Uri.EscapeDataString(userName)}:{Uri.EscapeDataString(password)}@{host}:{port}"
+ $"/Streaming/tracks/{logicalChannel}{streamNo}?starttime={startText}&endtime={endText}";
}
private static string FormatTime(DateTimeOffset value)
{
var useUtc = string.Equals(Environment.GetEnvironmentVariable("YUNCANG_RTSP_TIME"), "utc",
StringComparison.OrdinalIgnoreCase);
var time = useUtc ? value.UtcDateTime : value.ToLocalTime().DateTime;
return time.ToString("yyyyMMdd'T'HHmmss'Z'", CultureInfo.InvariantCulture);
}
///
/// 录像机时钟与本机时钟的偏差(设备 - 本机,秒)。
///
/// 扫码时间来自本机时钟,回放定位用设备时间 → 两者必须在同一条时间轴上。
/// 读不到设备时间 / 设备不支持该命令时返回零(保持原有行为)。
///
public TimeSpan ClockOffset(string host, int port, string userName, string password)
{
var key = $"{host}|{port}|{userName}";
if (_clockOffsets.TryGetValue(key, out var hit) && Environment.TickCount64 - hit.At < hit.Ttl)
{
return hit.Offset;
}
try
{
var before = DateTime.Now;
var device = _device.GetDeviceTime(host, port, userName, password);
var after = DateTime.Now;
// 取请求中点做本机时间,抵消一次往返的一半延迟
var local = before.AddTicks((after - before).Ticks / 2);
var offset = device - local;
_clockOffsets[key] = (offset, Environment.TickCount64, ClockOffsetTtlMs);
AppLog.Write($"[playback] 录像机 {host}:{port} 与本机时钟相差 {offset.TotalSeconds:+0.0;-0.0} 秒,回放时间已按录像机时钟对齐");
// 差到半小时以上基本不可能是「时钟没校准」,而是时区不一致:
// 这时回放时间会整体平移一个时区,画面 OSD 也会跟着对不上。
if (Math.Abs(offset.TotalMinutes) >= 30)
{
AppLog.Write($"[playback] ⚠ 差值达 {offset.TotalHours:+0.0;-0.0} 小时,疑似录像机时区与本机不一致"
+ "(请在录像机里把时区设为东八区,并检查摄像头是否跟随了错误的校时)");
}
return offset;
}
catch (Exception ex)
{
_clockOffsets[key] = (TimeSpan.Zero, Environment.TickCount64, ClockOffsetFailTtlMs);
AppLog.Write($"[playback] 读不到录像机时间(按本机时钟处理):{ex.Message}");
return TimeSpan.Zero;
}
}
/// 生成回放 RTSP 地址(自动把本机时间平移成录像机时间)
public string BuildRtspUrlFor(string host, int port, string userName, string password,
int logicalChannel, DateTimeOffset start, DateTimeOffset end, int streamType = 0)
{
var offset = ClockOffset(host, port, userName, password);
return BuildRtspUrl(host, userName, password, logicalChannel,
start.Add(offset), end.Add(offset), streamType);
}
// ==================== ① 校验有没有录像 ====================
///
/// 探测该时段有没有录像
///
/// **先走 8000(SDK 下载 2 秒到临时文件,看有没有数据)**,不行再走 RTSP 拉 2 秒看帧。
/// 设备不会主动告诉你空段,只能真拉一次。
///
public async Task CheckAsync(string host, int port, string userName, string password,
int channel, DateTimeOffset start, DateTimeOffset end, CancellationToken ct = default)
{
if (end <= start) return new PlaybackCheck(false, 0, 0, "回放区间为空");
// 扫码时间是本机时钟 → 平移成录像机时间,否则时钟偏差会把面单挤出回放窗口
var clock = ClockOffset(host, port, userName, password);
start = start.Add(clock);
end = end.Add(clock);
var sdkKey = $"{host}|{port}|{channel}|pb";
var trySdk = !_sdkPlayback.TryGetValue(sdkKey, out var capable) || capable;
// ① SDK(8000 私有协议):**全速推送**,实测 14 MB/s(≈17 倍速)
var probeEnd = start.AddSeconds(Math.Min(2, Math.Max((end - start).TotalSeconds, 1)));
var probeFile = Path.Combine(Path.GetTempPath(), $"yc_probe_{Guid.NewGuid():N}.ps");
if (trySdk)
{
try
{
var bytes = await Task.Run(() => _device.PullPlaybackToFile(host, port, userName, password,
channel, start.LocalDateTime, probeEnd.LocalDateTime, probeFile, null, ct), ct)
.ConfigureAwait(false);
AppLog.Write($"[playback] SDK 探测 {host} 通道{channel}:{bytes} 字节");
if (bytes > 16 * 1024)
{
_sdkPlayback[sdkKey] = true;
return new PlaybackCheck(true, -1, LogicalChannel(host, port, userName, password, channel),
null, "SDK");
}
}
catch (OperationCanceledException)
{
throw;
}
catch (Exception ex)
{
_sdkPlayback[sdkKey] = false;
AppLog.Write($"[playback] SDK 探测失败({ex.Message}),本设备后续直接走 RTSP");
}
finally
{
TryDelete(probeFile);
}
}
// ② RTSP 回落
var ffmpeg = HikFfmpegService.ResolveFfmpeg()
?? throw new HikException(uint.MaxValue, "未找到 ffmpeg,无法校验回放(安装目录 native\\ffmpeg\\ffmpeg.exe 缺失,建议重新安装本软件)");
var logical = LogicalChannel(host, port, userName, password, channel);
var url = BuildRtspUrl(host, userName, password, logical, start, end);
var seconds = Math.Clamp((end - start).TotalSeconds, 0.5, 2.0);
var args = new[]
{
"-hide_banner", "-nostdin", "-loglevel", "error",
"-rtsp_transport", "tcp", "-timeout", SocketTimeoutUs,
"-i", url,
"-t", seconds.ToString("0.#", CultureInfo.InvariantCulture),
"-an", "-f", "null",
// ⚠️ 靠 -progress 才能拿到 frame=:ffmpeg 的统计行是 info 级别,
// 用 -loglevel error 时根本不会打印(曾经因此把所有时段误判成「无录像」)
"-progress", "pipe:2", "-nostats",
"-",
};
var output = new StringBuilder();
var exit = await RunAsync(ffmpeg, args, line => { lock (output) output.AppendLine(line); }, ct)
.ConfigureAwait(false);
string text;
lock (output) text = output.ToString();
var match = FrameRegex.Match(text);
var frames = match.Success && int.TryParse(match.Groups[1].Value, out var count) ? count : 0;
if (frames > 0) return new PlaybackCheck(true, frames, logical, null, "RTSP");
var error = Summarize(text) ?? (exit == 0 ? "该时段没有录像" : $"ffmpeg 退出码 {exit}");
return new PlaybackCheck(false, 0, logical, error, "RTSP");
}
// ==================== ② 下载成 mp4 ====================
///
/// 下载一路回放到文件
///
/// 实测出来的两个坑(本项目 NVR):
/// 1. **回放流不会按 endtime 自己断**:ffmpeg 拉完数据还挂在 RTSP 读上,进程不退出 →
/// 必须加 -timeout(socket I/O 超时)オ能让它正常收尾;
/// 2. **不能直接写 mp4**:流没正常结束就不会写 moov atom,文件无法播放(moov atom not found)。
/// 所以先写 mpegts(流式容器,中途中断也能播),完成后本地转封装成 mp4。
///
/// 回放速度实测约 0.5x~3x(跟码流大小有关),所以**必须显示进度、必须能取消**。
///
/// 落地文件路径(mp4;转封装失败时是 .ts)
public async Task DownloadAsync(string host, int port, string userName, string password,
int channel, DateTimeOffset start, DateTimeOffset end, string outputPath,
IProgress? progress = null, CancellationToken ct = default)
{
var ffmpeg = HikFfmpegService.ResolveFfmpeg()
?? throw new HikException(uint.MaxValue, "未找到 ffmpeg,无法下载录像(安装目录 native\\ffmpeg\\ffmpeg.exe 缺失,建议重新安装本软件)");
if (end <= start) throw new HikException(uint.MaxValue, "回放区间为空");
// 扫码时间是本机时钟 → 平移成录像机时间(见 CheckAsync 的说明)
var clock = ClockOffset(host, port, userName, password);
start = start.Add(clock);
end = end.Add(clock);
Directory.CreateDirectory(Path.GetDirectoryName(outputPath) ?? AppContext.BaseDirectory);
// ① 优先 SDK(8000 私有协议),但**只在它被证明可用时**;
// 实测部分固件(本项目这台 NVR)GetFileByTime 返回句柄却不推数据 → 试一次就永久回落 RTSP。
var sdkKey = $"{host}|{port}|{channel}|pb";
if (!_sdkPlayback.TryGetValue(sdkKey, out var sdkCapable) || sdkCapable)
{
var tempPs = Path.Combine(Path.GetTempPath(), $"yc_pb_{Guid.NewGuid():N}.ps");
try
{
progress?.Report(new PlaybackProgress(0, "下载中(8000 全速)…"));
var bytes = await Task.Run(() => _device.PullPlaybackToFile(host, port, userName, password, channel,
start.LocalDateTime, end.LocalDateTime, tempPs,
received => progress?.Report(new PlaybackProgress(null,
$"下载中(8000 全速){received / 1024.0 / 1024.0:0.0} MB")), ct), ct)
.ConfigureAwait(false);
AppLog.Write($"[playback] SDK 拉流完成:{bytes} 字节");
if (bytes > 16 * 1024)
{
_sdkPlayback[sdkKey] = true;
progress?.Report(new PlaybackProgress(0.99, "正在封装成 mp4…"));
if (await RepackAsync(ffmpeg, tempPs, outputPath, ct).ConfigureAwait(false))
{
var okSize = new FileInfo(outputPath).Length;
progress?.Report(new PlaybackProgress(1, $"下载完成({Math.Round(okSize / 1024.0 / 1024.0, 1)} MB)"));
AppLog.Write($"[playback] 回放已下载:{outputPath}({okSize} 字节)");
return outputPath;
}
// mp4 封装不了 → 把设备原始 PS 留下(PotPlayer/VLC 能直接播)
var psPath = outputPath + ".ps";
if (File.Exists(psPath)) File.Delete(psPath);
File.Move(tempPs, psPath);
progress?.Report(new PlaybackProgress(1, "下载完成(原始封装 .ps)"));
AppLog.Write($"[playback] 封装失败,保留原始录像:{psPath}");
return psPath;
}
}
catch (OperationCanceledException)
{
throw;
}
catch (Exception ex)
{
_sdkPlayback[sdkKey] = false;
AppLog.Write($"[playback] SDK 下载失败({ex.Message}),本设备后续直接走 RTSP 554");
}
finally
{
TryDelete(tempPs);
}
}
var logical = LogicalChannel(host, port, userName, password, channel);
var url = BuildRtspUrl(host, userName, password, logical, start, end);
var totalMs = Math.Max((end - start).TotalMilliseconds, 1);
var totalSec = Math.Max((end - start).TotalSeconds, 1);
Directory.CreateDirectory(Path.GetDirectoryName(outputPath) ?? AppContext.BaseDirectory);
var tsPath = Path.ChangeExtension(outputPath, ".ts");
if (File.Exists(tsPath)) File.Delete(tsPath);
progress?.Report(new PlaybackProgress(0, "开始下载…"));
// ① 拉流存 ts(流式容器,中途取消也能播)
var pullArgs = new[]
{
"-hide_banner", "-nostdin", "-loglevel", "error",
"-rtsp_transport", "tcp", "-timeout", SocketTimeoutUs,
"-i", url,
"-t", (totalSec + 1).ToString("0", CultureInfo.InvariantCulture),
"-c:v", "copy", "-an", "-f", "mpegts",
"-progress", "pipe:2", "-nostats",
"-y", tsPath,
};
var exit = await RunAsync(ffmpeg, pullArgs,
line => ReportProgress(progress, line, totalMs, "下载中"), ct).ConfigureAwait(false);
var size = File.Exists(tsPath) ? new FileInfo(tsPath).Length : 0;
if (!File.Exists(tsPath) || size < 16 * 1024)
{
throw new HikException(uint.MaxValue,
exit == 0 ? "该时段没有拉到录像数据" : $"下载失败(ffmpeg 退出码 {exit})");
}
// ② 转封装成 mp4(本地操作,很快;失败就保留 ts)
progress?.Report(new PlaybackProgress(0.99, "正在封装成 mp4…"));
if (File.Exists(outputPath)) File.Delete(outputPath);
var convertArgs = new[]
{
"-hide_banner", "-nostdin", "-loglevel", "error",
"-i", tsPath,
"-c:v", "copy", "-an", "-movflags", "+faststart",
"-y", outputPath,
};
var convertExit = await RunAsync(ffmpeg, convertArgs, null, ct).ConfigureAwait(false);
var result = outputPath;
if (convertExit != 0 || !File.Exists(outputPath) || new FileInfo(outputPath).Length < 16 * 1024)
{
// mp4 封装不了(极少见)→ 保留 ts,也能直接播
AppLog.Write($"[playback] mp4 封装失败(exit={convertExit}),保留 ts:{tsPath}");
result = tsPath;
}
else
{
File.Delete(tsPath);
}
var finalSize = new FileInfo(result).Length;
progress?.Report(new PlaybackProgress(1, $"下载完成({Math.Round(finalSize / 1024.0 / 1024.0, 1)} MB)"));
AppLog.Write($"[playback] 回放已下载:{result}({finalSize} 字节)");
return result;
}
// ==================== ③ 按工作台布局合并成一个视频 ====================
///
/// 把多路下载好的片段**按工作台画布布局合并成一个视频**
///
/// 做法:先铺一张黑画布(`color` 虚拟输入),每路 `scale` 到它在快照里的尺寸,
/// 再用 `overlay=x:y` 摆到对应位置 —— 与工作台页面上的画面摆放一致。
///
/// ⚠️ 踩过的坑:**不要**把每路先 pad 成整张画布再叠加 ——
/// 补边是黑底,叠上去会把下面那路的画面整块盖住(表现是「合成完只剩一个小窗,其余全黑」)。
///
/// 为什么要重新编码:多路叠加没法 `-c:v copy`(要重画每个像素),所以这一步比下载慢,
/// 用 veryfast + crf 23 折中。
///
/// 各路下载好的文件(顺序与 一一对应)
/// 合并后文件路径
public async Task ComposeAsync(IReadOnlyList segments, IReadOnlyList streams,
string outputPath, IProgress? progress = null, CancellationToken ct = default)
{
if (segments.Count == 0) throw new HikException(uint.MaxValue, "没有可合并的片段");
if (segments.Count != streams.Count) throw new HikException(uint.MaxValue, "片段数与流数量不一致");
var ffmpeg = HikFfmpegService.ResolveFfmpeg()
?? throw new HikException(uint.MaxValue, "未找到 ffmpeg,无法合并视频(安装目录 native\\ffmpeg\\ffmpeg.exe 缺失,建议重新安装本软件)");
if (segments.Count == 1)
{
if (!string.Equals(segments[0], outputPath, StringComparison.OrdinalIgnoreCase))
{
if (File.Exists(outputPath)) File.Delete(outputPath);
File.Copy(segments[0], outputPath);
}
return outputPath;
}
var canvasWidth = streams.Max(item => item.CanvasWidth) > 0
? streams.Max(item => item.CanvasWidth)
: 1920;
var canvasHeight = streams.Max(item => item.CanvasHeight) > 0
? streams.Max(item => item.CanvasHeight)
: 1080;
var totalSec = Math.Max((streams[0].EndTime - streams[0].StartTime).TotalSeconds, 1);
var filters = new List();
for (var i = 0; i < streams.Count; i++)
{
var stream = streams[i];
var width = stream.Layout.Width > 0 ? stream.Layout.Width : canvasWidth;
var height = stream.Layout.Height > 0 ? stream.Layout.Height : canvasHeight;
// 帧率统一到 25(各路帧率不一样,overlay 会互相等待并对不齐)
filters.Add($"[{i + 1}:v]scale={width}:{height}:force_original_aspect_ratio=decrease,"
+ $"fps=25,format=yuv420p,setsar=1[v{i}]");
}
var current = "[0:v]";
for (var i = 0; i < streams.Count; i++)
{
var label = i == streams.Count - 1 ? "[out]" : $"[c{i}]";
filters.Add($"{current}[v{i}]overlay={streams[i].Layout.X}:{streams[i].Layout.Y}{label}");
current = label;
}
var args = new List
{
"-hide_banner", "-nostdin", "-loglevel", "error",
// 黑画布当底板(d 与录像时长一致);索引 0,各路视频从 1 开始
"-f", "lavfi", "-i",
$"color=c=black:s={canvasWidth}x{canvasHeight}:r=25:d={totalSec.ToString("0", CultureInfo.InvariantCulture)}",
};
foreach (var segment in segments)
{
args.Add("-i");
args.Add(segment);
}
args.AddRange(new[]
{
"-filter_complex", string.Join(';', filters),
"-map", current,
"-c:v", "libx264", "-preset", "veryfast", "-crf", "23",
"-an", "-movflags", "+faststart",
"-t", totalSec.ToString("0", CultureInfo.InvariantCulture),
"-progress", "pipe:2", "-nostats",
"-y", outputPath,
});
progress?.Report(new PlaybackProgress(0, "正在合并(按工作台布局)…"));
var totalMs = totalSec * 1000;
var exit = await RunAsync(ffmpeg, args.ToArray(),
line => ReportProgress(progress, line, totalMs, "合并中"), ct).ConfigureAwait(false);
if (exit != 0 || !File.Exists(outputPath) || new FileInfo(outputPath).Length < 16 * 1024)
{
throw new HikException(uint.MaxValue, $"合并失败(ffmpeg 退出码 {exit})");
}
var size = new FileInfo(outputPath).Length;
progress?.Report(new PlaybackProgress(1, $"合并完成({Math.Round(size / 1024.0 / 1024.0, 1)} MB)"));
AppLog.Write($"[playback] 已合并 {segments.Count} 路 → {outputPath}({size} 字节)");
return outputPath;
}
// ==================== 内部 ====================
/// 把设备原始录像(PS)转封装成 mp4;失败返回 false
private async Task RepackAsync(string ffmpeg, string input, string outputPath, CancellationToken ct)
{
if (File.Exists(outputPath)) File.Delete(outputPath);
var args = new[]
{
"-hide_banner", "-nostdin", "-loglevel", "error",
"-i", input,
"-c:v", "copy", "-an", "-movflags", "+faststart",
"-y", outputPath,
};
var exit = await RunAsync(ffmpeg, args, null, ct).ConfigureAwait(false);
if (exit == 0 && File.Exists(outputPath) && new FileInfo(outputPath).Length > 16 * 1024) return true;
// 复制失败(PS 里码流不规范)→ 转码兜底
AppLog.Write($"[playback] 转封装失败(exit={exit}),改用转码");
if (File.Exists(outputPath)) File.Delete(outputPath);
var transcode = new[]
{
"-hide_banner", "-nostdin", "-loglevel", "error",
"-i", input,
"-c:v", "libx264", "-preset", "veryfast", "-crf", "23",
"-an", "-movflags", "+faststart",
"-y", outputPath,
};
exit = await RunAsync(ffmpeg, transcode, null, ct).ConfigureAwait(false);
return exit == 0 && File.Exists(outputPath) && new FileInfo(outputPath).Length > 16 * 1024;
}
private static void TryDelete(string path)
{
try
{
if (File.Exists(path)) File.Delete(path);
}
catch
{
// 临时文件删不掉不影响业务
}
}
///
/// 跑一次 ffmpeg:stderr 逐行回调(进度/错误都在 stderr)
///
private async Task RunAsync(string ffmpeg, string[] args, Action? onLine, CancellationToken ct)
{
var psi = new ProcessStartInfo
{
FileName = ffmpeg,
UseShellExecute = false,
CreateNoWindow = true,
RedirectStandardOutput = true,
RedirectStandardError = true,
RedirectStandardInput = false,
};
foreach (var arg in args) psi.ArgumentList.Add(arg);
using var process = new Process { StartInfo = psi, EnableRaisingEvents = true };
process.ErrorDataReceived += (_, e) => { if (e.Data is not null) onLine?.Invoke(e.Data); };
process.OutputDataReceived += (_, e) => { if (e.Data is not null) onLine?.Invoke(e.Data); };
process.Start();
process.BeginErrorReadLine();
process.BeginOutputReadLine();
try
{
await process.WaitForExitAsync(ct).ConfigureAwait(false);
}
catch (OperationCanceledException)
{
TryKill(process);
throw;
}
return process.ExitCode;
}
private static void TryKill(Process process)
{
try
{
if (!process.HasExited) process.Kill(entireProcessTree: true);
}
catch
{
// 进程已经退了
}
}
/// 解析 `-progress` 的 `out_time_us=`,算百分比
private static void ReportProgress(IProgress? progress, string line, double totalMs, string label)
{
if (progress is null) return;
var time = OutTimeRegex.Match(line);
if (time.Success && long.TryParse(time.Groups[1].Value, out var micro))
{
var doneMs = micro / 1000.0;
var percent = Math.Clamp(doneMs / totalMs, 0, 0.999);
var speed = SpeedRegex.Match(line);
var suffix = speed.Success ? $" · {speed.Groups[1].Value}x" : string.Empty;
progress.Report(new PlaybackProgress(percent, $"{label} {percent:P0}{suffix}"));
}
}
/// 把 ffmpeg 的输出压成一句能看懂的错因
private static string? Summarize(string output)
{
foreach (var line in output.Split('\n', StringSplitOptions.RemoveEmptyEntries))
{
var text = line.Trim();
if (text.Length == 0) continue;
if (text.Contains("401", StringComparison.Ordinal) || text.Contains("Unauthorized", StringComparison.OrdinalIgnoreCase))
return "录像机拒绝访问(账号/密码错)";
if (text.Contains("400 Bad Request", StringComparison.OrdinalIgnoreCase))
return "该时段没有录像(RTSP 返回 400)";
if (text.Contains("404", StringComparison.Ordinal) || text.Contains("Not Found", StringComparison.OrdinalIgnoreCase))
return "该通道/时段没有录像(RTSP 404)";
if (text.Contains("Connection refused", StringComparison.OrdinalIgnoreCase))
return "连不上录像机的 RTSP 端口(554)";
if (text.Contains("timed out", StringComparison.OrdinalIgnoreCase))
return "连接录像机超时";
if (line.StartsWith("Error", StringComparison.OrdinalIgnoreCase) || text.StartsWith("rtsp:", StringComparison.OrdinalIgnoreCase))
return text.Length > 160 ? text[..160] : text;
}
return null;
}
private static int ResolveRtspPort()
{
return int.TryParse(Environment.GetEnvironmentVariable("YUNCANG_RTSP_PORT"), out var port) && port > 0
? port
: 554;
}
public void Dispose()
{
// 后台任务由调用方各自取消;这里没有需要释放的资源
}
}